The light grey armchair, tailor-cut to take care of your back
- Reference: DOS-MIHAUT-LGR
This light grey armchair is made to your measurements.
The depth of the seat is not too long, so that your back can rest on the backrest.
The seat angle of 12° allows you to sit comfortably at the back of the chair.
The half-height backrest (at shoulder level) allows you to rest while reading a book or watching a film.
The high resilience foams, combined with a seat height and depth to suit your size, guarantee long-lasting comfort.
For other sizes than those proposed in the drop-down menus, please follow the guide and complete the field below. You must save the customisation before adding the product to the basket. You may also be interested in our table of average seat dimensions by size.
I need some help
What are the advantages of a custom-made chair?
Made to measure, this armchair offers
. a seat height and depth which, by harmoniously distributing the support pressures, improves blood circulation; this avoids pain felt in the buttocks, due to poor vascularisation in relation to the ischiums.
. a seating depth that allows you to sit at the bottom of the chair, with your back resting against the backrest; the column thus retains its natural curvature
. the seat does not rest against the calf so that venous return is not hindered.
. a seat angle of 12° reinforces these benefits by making it easier for the back to rest against the backrest and reducing pressure on the seat.
The choice of foam
The Bultex foams used for seat and back cushions have a high resilience, which means that they retain their original properties for a long time. Their relatively low thickness, compared to a traditional lounge chair, makes it easier to get up and avoids the hammock effect. The high density foam of 38 Kg/m3 makes the armchair comfortable for hours on end.
It grey armchair can be stored flat in its packaging.
The structure of the armchair consists of 4 panels in Valchromat with slots: they can be assembled without tools. The seat can be quickly disassembled for transport or stored in a reduced volume.
The Valchromat panels are coloured in the mass: if a panel is damaged on its surface it can be sanded to recover its original colour.
High resilience Bultex firm foam with a density of 40 Kg/m3. Thickness 50 mm. Bultex is a high quality foam for a lasting support.
Bultex high resilience PU foam 30 Kg/m3 thickness 50 mm for a lasting support and comfort
Angle of the seat 12°, angle of the backrest is 22.5°
19 mm thick Valchromat panels, tinted with organic dyes. On the surface there are small pure wood fibres which have not absorbed the organic dyes.
3 layers of clear matt vitrifier - Ceramic Technology V33: high performance resin combined with ceramic microbeads, creating a shield and increasing strength by 40%.
Made in France from Valchromat panels made in Portugal. Precision cutting of the base to measure with a numerical control. Handcrafted finishing of the structure and cushions.
Delivery and assembly
Delivery flat-pack to reduce CO2 emission, in a wooden crate. The grooved panels can be assembled without tools (some accessories may require the use of a screwdriver for assembly).
Removable cover. Wash cushion and frame with mild detergent ( water and soap ).